Draw/line
Home / Guides / Peptide purity: what to check and what to ask

Peptide purity: what to check and what to ask

What a purity figure does and does not prove, where the risk sits, red flags, and the questions to ask a pharmacy, a prescriber or a certificate of analysis.

7 min read · By the Drawline team · Reviewed

No label, website or certificate can prove what is in a vial. Only an FDA-approved product from a licensed pharmacy comes with that assurance. For anything else, the checks below lower the risk; none of them removes it. This guide explains what purity means, where the risks sit and the questions worth asking before you inject anything.

What a purity figure covers, and what it does not

A purity figure (for example “99%”) usually comes from a test called HPLC. It shows what share of the sample is the main substance. It does not show:

  • Identity. A different peptide of a similar size can give the same clean result. Identity needs a separate test, usually mass spectrometry.
  • Amount. A powder also holds salts, water and leftovers from manufacturing, so a vial labeled 10 mg can hold noticeably less of the peptide itself. That changes every dose you calculate.
  • Sterility. Whether bacteria or fungi are present needs a sterility test.
  • Endotoxins. Fragments of dead bacteria can cause fever, chills and injection-site reactions even in a sterile, “pure” product. They need their own test.
  • Other contaminants, such as heavy metals or solvents.

A high purity number on its own is the least useful of these facts. See how to read a certificate of analysis.

Where the product comes from matters most

  • FDA-approved brand product (for example a Wegovy or Zepbound pen from a pharmacy): FDA has reviewed how it is made, and every batch must meet its approved standards.
  • Compounded by a state-licensed pharmacy (503A): made for you on a prescription, overseen by the state board of pharmacy. It is not FDA-approved, and quality varies between pharmacies.
  • Compounded by an outsourcing facility (503B): registered with FDA and expected to follow federal manufacturing rules. Registration does not mean a recent inspection, so ask.
  • “Research use only” products: sold as laboratory chemicals with no oversight for human use. Nobody checks identity, amount, sterility or endotoxins on your behalf, and investigations have found products that did not contain what the label said.

For compounded semaglutide, FDA has warned that some compounders use salt forms (semaglutide sodium or acetate). FDA says these are different active ingredients from the approved drugs and should not be used.

Red flags

  • “Not for human consumption” or “research use only” on the label, while the seller hints at human use.
  • No prescription needed for a prescription drug.
  • No certificate of analysis, or one with a different lot number from your vial, no date, or no named lab.
  • The same certificate used for many products or batches, or every product listed at 99% or higher.
  • No physical address, no pharmacy licence, or payment only by crypto, gift card or wire transfer.
  • A price far below what pharmacies charge.
  • Shipped warm, with no cold pack, when the label says to keep it cold.
  • Pressure to buy now, “bulk deals” or claims that it cures or prevents disease.

Questions to ask a pharmacy or prescriber

  1. Is the pharmacy licensed in my state? Is it a 503A pharmacy or a 503B outsourcing facility, and when was it last inspected?
  2. Is the active ingredient the same one as in the approved drug, and not a salt form?
  3. Where does the active ingredient come from, and is that supplier registered with FDA?
  4. Is each batch tested for strength, sterility and endotoxins? Can I see the results for my lot?
  5. What is the beyond-use date, and how should I store it?
  6. Which diluent should I use, and how much? Which syringe matches the label?
  7. Who do I call if something seems wrong with the product?

Questions to ask of a certificate of analysis

  • Does its lot number match the one on my vial?
  • Which lab ran it, and can I confirm the result with that lab directly?
  • Does it test identity (mass spectrometry), not only purity?
  • Does it include sterility and endotoxin results?
  • Is it recent, and does it state the amount of peptide per vial?

When it arrives

  • The seal is intact, and the label shows the name, strength, lot number and expiry date.
  • It arrived cold if the label says to keep it cold.
  • Once mixed, the liquid is clear, with no cloudiness, specks or color.
  • For pens, check the packaging against the manufacturer’s; see spotting counterfeit pens.

A test of one vial says nothing about the next batch. Checking each arrival matters more than any single test.

If something seems wrong

Do not use it. Keep the vial, the packaging and any paperwork. Contact your prescriber or pharmacist. Report a suspected bad, contaminated or fake product, and any reaction, to FDA through MedWatch. Drawline’s side-effect log links you there.

Sources: FDA: Concerns with unapproved GLP-1 drugs used for weight loss; FDA: Registered outsourcing facilities; NABP: Buy safely, verify an online pharmacy; FDA: BeSafeRx resources for consumers; CDC: Preventing unsafe injection practices; FDA: MedWatch.

This guide is for research and educational use. It is not medical advice. Confirm anything that affects your health with a licensed professional.

Spot a mistake or an out-of-date fact? Report an error. We check every report against the sources.